Fubar1977
Feb 21, 07:22 AM
Official Apple anything is expensive.
Never buy memory/HDD upgrades etc. from Apple, that logo on the box will add about 75% to the real price.
Never buy memory/HDD upgrades etc. from Apple, that logo on the box will add about 75% to the real price.
Hellhammer
Apr 11, 09:31 AM
Nice! Was it hard to make? Do you have any fillings in there? If it's even a bit loose, it may sway while carrying it and wood is pretty tough so it could get dents or scratches.
Applejuiced
Apr 28, 08:14 PM
Any new info on unlock for BB 04.10.01 ?
Seems like it's overdue
Doesn't look good so far.
Seems like it's overdue
Doesn't look good so far.
Dane D.
Aug 6, 12:12 AM
I don't run it any more as it apparently rips hard drives and I couldn't be bothered setting up the RAM disk method. It also turns my G5 into a bit of a wind tunnel some times.
BS. Where are you getting your info? The CPU does all the work, the HD only stores the info crunched to send back to SETI. I am coming up on my 1st yr anniversary and no problems. My main machine is the G3/300, 6 yrs old and still purring like the day it was new. Just make sure you have a good air flow through the box and everything will be fine. It is the peps that use PowerBooks that burn up your machine, probably because they don't raise it off the table to get air underneath it. I use 1/2" rubber feet and a small desk fan blowing across the unit to cool my PowerBook the fan hardly comes on. My temps never exceed 109�F in my G3.
BS. Where are you getting your info? The CPU does all the work, the HD only stores the info crunched to send back to SETI. I am coming up on my 1st yr anniversary and no problems. My main machine is the G3/300, 6 yrs old and still purring like the day it was new. Just make sure you have a good air flow through the box and everything will be fine. It is the peps that use PowerBooks that burn up your machine, probably because they don't raise it off the table to get air underneath it. I use 1/2" rubber feet and a small desk fan blowing across the unit to cool my PowerBook the fan hardly comes on. My temps never exceed 109�F in my G3.
more...
Mal
May 4, 03:40 PM
Yep, it's been well established around here that GainSaver is a bunch of crock, and that no one should even consider buying from them. Of course, that doesn't mean that people don't get caught without finding out about them first. Sorry to hear you had a bad experience, but I don't think any of us are surprised.
jW
jW
taylorwilsdon
Mar 19, 12:41 PM
The ad is very misleading. The auction is over so there's nothing to change that. I'm very sure the seller must think it's new. No way a refurbished one sells for that much when a brand new one can be bought for less than that unlocked on Ebay from what I have seen.
No, it isn't. I was very clear as far as I'm concerned and I don't need a new member telling me how to do things. Like I said, I'm going to send a brand new in box phone, not a refurb.
The winning bidder was a hacked account - mother ****er.
No, it isn't. I was very clear as far as I'm concerned and I don't need a new member telling me how to do things. Like I said, I'm going to send a brand new in box phone, not a refurb.
The winning bidder was a hacked account - mother ****er.
more...
blunderboy
Jul 6, 03:36 AM
Don't we have enough fear, uncertainty, and doubt without invoking even more of it?
DanTheMan
Dec 22, 01:23 PM
Did a search, but couldn't find any sites in the U.S. selling it....know where one could get it?
I checked and I think the only place that sells it is Dension USA (http://www.densionusa.com). I called them because I am also looking to get this solution for my car and they said it would not be shipping until February 2005 and it will cost about $219
Also of note with the Dension solution if you get a new car down the road and want to move it to the new car, it will only work if the new car is the same make as your current car (i.e. Honda to Honda not Honda to BMW) which sucks because they should just make it so you can just swap cable connecting the ICE Link to the car's headunit. Oh well I guess I'll see what the iCruze has to offer when it comes out.
I checked and I think the only place that sells it is Dension USA (http://www.densionusa.com). I called them because I am also looking to get this solution for my car and they said it would not be shipping until February 2005 and it will cost about $219
Also of note with the Dension solution if you get a new car down the road and want to move it to the new car, it will only work if the new car is the same make as your current car (i.e. Honda to Honda not Honda to BMW) which sucks because they should just make it so you can just swap cable connecting the ICE Link to the car's headunit. Oh well I guess I'll see what the iCruze has to offer when it comes out.
more...
hehe299792458
Mar 26, 09:31 PM
My mouse (Microsoft Basic Optical Mouse v2.0) show far less mouse acceleration in Lion compared to Snow Lion.
I haven't read anything about this so I guess it's something on my end? Or does other people get similar behavior in Lion?
What exactly do you mean by acceleration?
I haven't read anything about this so I guess it's something on my end? Or does other people get similar behavior in Lion?
What exactly do you mean by acceleration?
mif
Apr 12, 01:15 AM
or vice versa
more...
sine-nomine
May 4, 07:46 PM
In /Library/LaunchDaemons there is a file called com.apple.third_party_3b_kext_keylogger
Just wondering what this is. I haven't been able to find any information about it so far.
Just wondering what this is. I haven't been able to find any information about it so far.
TheOnlyJon
Sep 14, 09:22 PM
Looks like a Dragonfly Larva (http://clean-water.uwex.edu/pubs/clipart/images/CRITTER/large/DragonflyLarva.jpg) to me. :)
more...
kammron
Dec 8, 05:49 PM
this for everyone who suffers from the dull boring look of os 9.
apple banned these kileidiscope themes but theyre back.
http://buryme34.tripod.com/kschemes.html
apple banned these kileidiscope themes but theyre back.
http://buryme34.tripod.com/kschemes.html
Herdfan
Apr 11, 03:00 PM
About a week ago I got a new MBP 17". I wanted to upgrade the RAM, but let the sales guy talk me out of it. Well, my last day to return is this saturday. Would I be able to get the "upgrade" price if I took it in or would they try to make me pay full price?
I think I should be able to get the upgrade price as I could still return it and buy a new one with the memory I want.
Anyone have any experience with this?
Thanks.
I think I should be able to get the upgrade price as I could still return it and buy a new one with the memory I want.
Anyone have any experience with this?
Thanks.
more...
munkle
Dec 4, 10:03 AM
Not much to say about the design, it's a Dreamweaver template right? It works well enough.
Just a thought but you might be better running your site off a blogging platform, like WordPress (http://wordpress.org). It would probably make things a lot easier for you, especially when it comes to updating your content.
Just a thought but you might be better running your site off a blogging platform, like WordPress (http://wordpress.org). It would probably make things a lot easier for you, especially when it comes to updating your content.
Andronicus
Nov 16, 10:55 PM
I love iPhone commercials.
more...
28Fiend
Apr 21, 09:35 AM
http://www.ifixdirect.com/
iFixitdirect looks like they have a quality swap kit, includes everything the white iPhone has. They even mention oem quality parts and no problems with the prox sensor.
iFixitdirect looks like they have a quality swap kit, includes everything the white iPhone has. They even mention oem quality parts and no problems with the prox sensor.
awadeee
May 1, 07:37 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148a Safari/6533.18.5)
I'd like to see one with an Otterbox Commuter. This is what I would be buying most likely if and when I get my white ip4 so it'd be nice to see if it will fit. Emailed their customer service last week but no response yet.
I'd like to see one with an Otterbox Commuter. This is what I would be buying most likely if and when I get my white ip4 so it'd be nice to see if it will fit. Emailed their customer service last week but no response yet.
Abstract
Jun 16, 04:16 AM
I'd love to have a place for flamewars as well. Some place to vent, call each other names, and just bash everyone and everything you think is dumb, or extremely frustrating.
whats your problem :eek: you know some people dont want to die alround here or have there house burned down :p
*grabs for his pitchfork and torch*
whats your problem :eek: you know some people dont want to die alround here or have there house burned down :p
*grabs for his pitchfork and torch*
pqft
Apr 30, 11:38 AM
I am having the same problem
dobbin
Oct 17, 04:32 AM
This is indeed a well known issue with cubes. Some people were affected immediately, and others only after a period of time like you.
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
larkost
Apr 26, 10:27 PM
Two notes for you:
1) Why have you not told us what your device is? At least the class of device? This could at least get us to the point of knowing if we should expect the OS to have a generic HID divice driver for this class of device. If there is no generic class driver, then: yes, absolutely you will need to create a device driver (and no, it is not going to be easy).
Unless you ask good questions, you should expect nothing but bad answers.
2) This is not the sort of forum where you should expect to find people who can write drivers. This is a user-level forum. If you need help writing device drivers, then your best bet (short of paying someone who knows how to write device drivers on the Mac) is going to be on Apple's Darwin-drivers list (http://lists.apple.com/mailman/listinfo/darwin-drivers).
1) Why have you not told us what your device is? At least the class of device? This could at least get us to the point of knowing if we should expect the OS to have a generic HID divice driver for this class of device. If there is no generic class driver, then: yes, absolutely you will need to create a device driver (and no, it is not going to be easy).
Unless you ask good questions, you should expect nothing but bad answers.
2) This is not the sort of forum where you should expect to find people who can write drivers. This is a user-level forum. If you need help writing device drivers, then your best bet (short of paying someone who knows how to write device drivers on the Mac) is going to be on Apple's Darwin-drivers list (http://lists.apple.com/mailman/listinfo/darwin-drivers).
iJohnHenry
Feb 8, 07:04 PM
Now, can we teach wolves to bring down helicopters?
We can teach dolphins to sink ships, but they are both on/under water.
Teaching a wolf to fly might be the flaw in your proposal. :D
We can teach dolphins to sink ships, but they are both on/under water.
Teaching a wolf to fly might be the flaw in your proposal. :D
EricNau
Dec 21, 08:22 PM
A lot of electronics have a funny smell when you first get them. Is the smell getting better or worse?
No comments:
Post a Comment