NyteStarNyne
11-10 10:15 PM
My two entries (hope I'm not too late!): Clockwork Kirupa (http://www.kirupa.com/forum/showthread.php?t=338568) & Kirupa Hero (http://www.kirupa.com/forum/showthread.php?t=338583)
Thanks :)
Thanks :)
wallpaper wrist tattoos for girls_12.
vban2007
10-24 03:38 PM
I got LUD on AP 3 days back.. But same status... Do anyone lese in same situation?
tonyHK12
11-08 09:24 AM
CIR was a thorn to many -- mostly because of the amnesty... or whatever for the ILLEGALS...
Yes I feel at the end of the day most people were against amnesty, and other Bills for Illegals kind of would have lead to it inspite of promising not to (backdoor).
This was all in spite of them having spent millions of dollars over more than 4 years, along with campaign contributions, processions, strong lobbying and what not, and still no change in law to show for it - back to square one.
They have a huge advantage over Immigration voice in terms of donors and funding available, which needs to change.
Yes I feel at the end of the day most people were against amnesty, and other Bills for Illegals kind of would have lead to it inspite of promising not to (backdoor).
This was all in spite of them having spent millions of dollars over more than 4 years, along with campaign contributions, processions, strong lobbying and what not, and still no change in law to show for it - back to square one.
They have a huge advantage over Immigration voice in terms of donors and funding available, which needs to change.
2011 wrist tattoos for girls_12.
archum123
08-03 09:34 AM
Hey! I am a practising dentist and I am on H1B.
Q: Does she need a dental license to apply for H1 ?
Ans:Yes a dental license is required for applying for a dentist position
Q: She 'qualifies' for a dental license (ie meets all requirements), but almost all states require a SSN to issue a dental license. Since she is on H4, she doesnt have a SSN. Problem: Dental License needs SSN - SSN needs H1 - H1 needs license - basically a "Catch 22" position here
Ans: Qualification is a very broad term. A dental degree doesnot make one eligible for a license. There are other important requirements for a license like National dental Boards, a clinical exam, jurisprudence exam of the state.
Also, if one one "qualifies" with all the requirements he or she can apply based on the TIN #. The board must be informed that a TIN is used and will need to be updated with SSN when you recieve one.
HI, does the same holds good or a DENTAL HYGENISTS ? is there any chances to be sponsered for h1?
Q: Does she need a dental license to apply for H1 ?
Ans:Yes a dental license is required for applying for a dentist position
Q: She 'qualifies' for a dental license (ie meets all requirements), but almost all states require a SSN to issue a dental license. Since she is on H4, she doesnt have a SSN. Problem: Dental License needs SSN - SSN needs H1 - H1 needs license - basically a "Catch 22" position here
Ans: Qualification is a very broad term. A dental degree doesnot make one eligible for a license. There are other important requirements for a license like National dental Boards, a clinical exam, jurisprudence exam of the state.
Also, if one one "qualifies" with all the requirements he or she can apply based on the TIN #. The board must be informed that a TIN is used and will need to be updated with SSN when you recieve one.
HI, does the same holds good or a DENTAL HYGENISTS ? is there any chances to be sponsered for h1?
more...
coopheal
04-23 09:12 PM
I understand the 10-day rule, but when does the clock start?
The date of lease starting or the date of actual move.....ideally these shouldnt be too far apart, but in my case they will be, hence the confusion.
LT
As per my understanding 10 days is from the time you change your permanent address. Due to lease constraint I also had two apartments at same time. I filled online AR-11 within 10 days after I moved to new apartment.
The date of lease starting or the date of actual move.....ideally these shouldnt be too far apart, but in my case they will be, hence the confusion.
LT
As per my understanding 10 days is from the time you change your permanent address. Due to lease constraint I also had two apartments at same time. I filled online AR-11 within 10 days after I moved to new apartment.
delhirocks
06-17 04:13 PM
Labor process through PERM can take anywhere from 3 weeks to more than a year (after filing). Most time consuming part is (if you are just initaing the process with your employer) the pre-filing documentation.
If you have a masters or better, and your current job does not REQUIRE a Masters degree, then you might want to ask HR to change/tweak your job profile. If thats an option and they are willing to do it, might take some time, but in the longer run, you will be better off under EB2 than EB3.
You will need letters from all your previous employers, verifying the job discription
Once that is in hand, your company will have to post your job in a newspaper/internal company website/job board and also in a visible place in your company premises for a month (X + 30 days)
After that 30 day period, you wait for any responses for an addidtional 30 days (X+60 days)
After that, your company/HR/Lawyer would need some time to put everything together before filing (X + 70 days)
Bear in mind this is the best case scenario. I started the process in December mid...filed for Labor in 1st week of June.
On your second point (dates being current), Iam very doubtfull that by the time Iam ready to file for 140/485, the dates will be current.
And ofcourse, if this ain't too daunting, THE CIR might put a wrench in your best laid plans, There is a talk about May 15th being the deadline for this process, untill Oct-08 when the new point system comes into play...good luck
If you have a masters or better, and your current job does not REQUIRE a Masters degree, then you might want to ask HR to change/tweak your job profile. If thats an option and they are willing to do it, might take some time, but in the longer run, you will be better off under EB2 than EB3.
You will need letters from all your previous employers, verifying the job discription
Once that is in hand, your company will have to post your job in a newspaper/internal company website/job board and also in a visible place in your company premises for a month (X + 30 days)
After that 30 day period, you wait for any responses for an addidtional 30 days (X+60 days)
After that, your company/HR/Lawyer would need some time to put everything together before filing (X + 70 days)
Bear in mind this is the best case scenario. I started the process in December mid...filed for Labor in 1st week of June.
On your second point (dates being current), Iam very doubtfull that by the time Iam ready to file for 140/485, the dates will be current.
And ofcourse, if this ain't too daunting, THE CIR might put a wrench in your best laid plans, There is a talk about May 15th being the deadline for this process, untill Oct-08 when the new point system comes into play...good luck
more...
Enginator
09-17 12:58 PM
My school has a rule where 6 credit hours for grad school are considered full time, whereas for most other schools its 9 credits. Because of this I am forced to take 3 credits per semester because of my H1 status, and to remain as a part time. I dont recommend taking a risk at this stage, and though this makes me a quarter part time student, its better than taking no classes :)
2010 wrist tattoos for girls_12
dpp
06-20 05:42 PM
I am confused. I have I 140 approval copy but it does not have A# in it. I know lots of people who have approved I 140 and they have A# in it. Please let me know what should I do in this case?
Just leave it blank. But my approval has it and so i am using it.
Just leave it blank. But my approval has it and so i am using it.
more...
gokhale35
03-01 11:22 AM
[QUOTE=Can2004;227413]Hi All,
I used to commute across the border from Canada to work(on h1b) between 2004 and 2006. My passport was stamped just the first time and never after that.
In 2006 we moved to US by road and started living here. Haven't left States since then. Our passports were checked as usual but not stamped at the border although the U-Haul I was driving was inspected and our luggage and other stuff was inspected too.
Now I have received a RFE from USCIS on our pending I- 485's that were filed last August. They want us to prove that our last date of entry was indeed what we have entered in the I-485 form.
Any suggestions on how to respond to this RFE.
I would suggest to take a letter from your employer saying that you reported to work the following day. Also show any purchases you made after coming back here like credit card bills. Any lease paperwork and checks that you were paying rent or mortgage. These are just few ideas . But do check with your attorney as they are in better position to respond.
I also did my PR landing in canada and when returning back next day I was not given any new I-94 nor the I-94 was stamped because I was returning within 30 days. But I have not gone back to canada after that and have given up the canada PR because I wanted to pursue the US PR here.
I used to commute across the border from Canada to work(on h1b) between 2004 and 2006. My passport was stamped just the first time and never after that.
In 2006 we moved to US by road and started living here. Haven't left States since then. Our passports were checked as usual but not stamped at the border although the U-Haul I was driving was inspected and our luggage and other stuff was inspected too.
Now I have received a RFE from USCIS on our pending I- 485's that were filed last August. They want us to prove that our last date of entry was indeed what we have entered in the I-485 form.
Any suggestions on how to respond to this RFE.
I would suggest to take a letter from your employer saying that you reported to work the following day. Also show any purchases you made after coming back here like credit card bills. Any lease paperwork and checks that you were paying rent or mortgage. These are just few ideas . But do check with your attorney as they are in better position to respond.
I also did my PR landing in canada and when returning back next day I was not given any new I-94 nor the I-94 was stamped because I was returning within 30 days. But I have not gone back to canada after that and have given up the canada PR because I wanted to pursue the US PR here.
hair Very popular with girls 12 and
sk.aggarwal
02-08 07:58 PM
Good. Just make sure the lawyers are eligible to practice employment law in the state you have been sued in. Stay cool and just make sure this gets resolved ASAP. Attorney and law suits are very expensive and can run into several thousand dollars if you drag it longer. Save the trouble, hire an attorney with clear mandate to negotiate with your employer's attorney. Courts also provide an arbitration process. Tell your attorney that you don't have money and what will be the cheapest and fastest way to resolve this. See where it goes.
more...
chandler_vt
04-30 08:17 AM
Where did you get this info? Could you please point out a reference that says so?
You have to think about it in these terms.
1) Say you show the experience. Then it means you were working in US while being on h4. It doesn't matter if you received salary here or not. Like say if some VP of infosys comes to US for a meeting, he is getting his salary in India. But he is here on proper visa to do his work.
2) On the other hand, h4 prevents you from doing any kind of work while in US. Although u may still be employee of a company in other country, you CAN't work. Simple.
Someone mentioned a British citizen gets paid in pounds while she works in Cali. See my example of Infosys VP. Its important to know which visa she has. I m sure she won't be on H4.
You have to think about it in these terms.
1) Say you show the experience. Then it means you were working in US while being on h4. It doesn't matter if you received salary here or not. Like say if some VP of infosys comes to US for a meeting, he is getting his salary in India. But he is here on proper visa to do his work.
2) On the other hand, h4 prevents you from doing any kind of work while in US. Although u may still be employee of a company in other country, you CAN't work. Simple.
Someone mentioned a British citizen gets paid in pounds while she works in Cali. See my example of Infosys VP. Its important to know which visa she has. I m sure she won't be on H4.
hot of Girls with Tattoos
BB_1976
06-17 09:20 AM
My H1B expires in Oct 2006, I applied extension for my 7th year and got approval till Oct 2007, based on pending labor with company A. I am planning to change employer soon. They are planning to file my Labour before end of 6th year. Still I am confused. My 7th year starts from Jan 2007, will this H1B be valid even if company A is withdrawing my application or even if the company closes?
I saw in the earlier posting that 8th year extension is valid even if the employer withdraws the pending LC
I heard for someone else that my 7th year H1B becomes invalid when the company A withdraws or closes.
Please advice. I really appreciate your help.
thanks:)
I saw in the earlier posting that 8th year extension is valid even if the employer withdraws the pending LC
I heard for someone else that my 7th year H1B becomes invalid when the company A withdraws or closes.
Please advice. I really appreciate your help.
thanks:)
more...
house celebrity wrist tattoos. A wrist tattoo worn by this
greyhair
09-30 10:24 PM
... there are always idiots in any group.
I wouldn't be worried if there were some idiots in this Chinese group. The reason I'm worried is because the entire group is idiot. These Chinese are knowing shooting themselves in the foot. They are ok as long as Indians are getting shot too. If this is not dumb then I don't know what is.
I wouldn't be worried if there were some idiots in this Chinese group. The reason I'm worried is because the entire group is idiot. These Chinese are knowing shooting themselves in the foot. They are ok as long as Indians are getting shot too. If this is not dumb then I don't know what is.
tattoo celebrity wrist tattoos.
vivek_k
03-09 02:22 PM
Even though this is the wrong thread, can somebody please recommend a good attorney in Oklahoma City Area. I need to hire a different one since the one I am with currently is not good.
I would appreciate if somebody would point me to the right direction.
I would appreciate if somebody would point me to the right direction.
more...
pictures cute wrist tattoos. wrist
Brasco
January 28th, 2008, 04:29 PM
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. - Mats
You are technically correct of course, but for practical purposes, if Shannon's primary goal is trying to capture a good depth of field of a child running around, and based on Shannon's comment about the willingness to crop, DOF will be easier to achieve with a wider lens.
Having said that, it was good for you to provide the rest of the story as it may be the basis of decisioning as the skills improve.
You are technically correct of course, but for practical purposes, if Shannon's primary goal is trying to capture a good depth of field of a child running around, and based on Shannon's comment about the willingness to crop, DOF will be easier to achieve with a wider lens.
Having said that, it was good for you to provide the rest of the story as it may be the basis of decisioning as the skills improve.
dresses Girls Tattoo Design of Star
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
more...
makeup heart wrist tattoos. heart
desigirl
12-02 09:42 AM
what are our chances if the Dream Act does not pass? Dream is #7 on the list.
girlfriend small dragon tattoos for man amp;
pappu
01-07 07:19 PM
http://immigrationvoice.org/
Please stay tuned for a massive IV campaign coming up. We will be announcing it tonight on the forums.
Contact your chapter leaders for various state chapter action items.
Please stay tuned for a massive IV campaign coming up. We will be announcing it tonight on the forums.
Contact your chapter leaders for various state chapter action items.
hairstyles Feminine Wrist Tattoos.
Sunx_2004
10-08 04:29 PM
I am also in the same situation. But not sure about H1 transfer. I posted all the questions to our lawyer and waiting for reply.
Did your attorney replied back?
Did your attorney replied back?
ilwaiting
07-01 03:18 PM
Then looks like they have to review at least 94% of the cases they rejected.
Mostly of the people just think its just giving the annonymous name,phone numbers and getting the benefit of the decision .Please read these point and understand carefully before jumping.
Please be aware, though, that USCIS is likely to examine plaintiffs� adjustment of status applications more closely than it otherwise might. It may ask the plaintiffs questions and ask for additional information about their adjustment applications or immigration status. See below regarding �discovery.�
http://www.murthy.com/current485/VisaBulletinFAQ6-29-07.pdf
Mostly of the people just think its just giving the annonymous name,phone numbers and getting the benefit of the decision .Please read these point and understand carefully before jumping.
Please be aware, though, that USCIS is likely to examine plaintiffs� adjustment of status applications more closely than it otherwise might. It may ask the plaintiffs questions and ask for additional information about their adjustment applications or immigration status. See below regarding �discovery.�
http://www.murthy.com/current485/VisaBulletinFAQ6-29-07.pdf
talash
10-16 08:30 PM
I had also gone to local centre with info pass to buy some more time to reply MTR coz i didnt have enough evidence to prove A2P .they told me file within 30 days with what ever i have as tell them that u got notice on 28th day n buy more time .But advice was to file within 30 days .
No comments:
Post a Comment